Granite
used for a long time the need for its polished, it can be restored to its
former beauty, commonly known as refurbished. Here, I will talk about: a variety
of ways and polished stone.
Before
renovation polished pointing first, and then do water, do caulk, the purpose is
to make as little water absorption granite, brown granite absorbent to reduce
British law, under conditions permitting, the last to do it again waterproof.
Roughing:
Granite groove joints before grinding to do waterproofing and caulking. Came
out to be waterproof, hard resin using diamond grinding block, coarse to
remember that not too much water, each grinding mill finished dragging a clean
mop, thoroughly dry the water, check the grinding notches deep left Road is
zoned with 50 # grinding worn away, and so on, go tic-tac-grinding machine,
coarse grind 45% the total time of completion of the project is to ensure the
quality and acceptance of the key links.
Finely
ground: after grinding to do before waterproof, waterproof effect after it, use
a soft diamond resin sheet mill, finely grind the whole time accounted for 35%,
after fine grinding to 2000 # gloss up to 50 degrees.
Grinding:
grinding granite must have 70% before drying, first with natural granite fill
sealant for pre-processing, the granite at the same time strengthen the loose
fill material. After grinding to enhance high gloss, granite surface density
improves, and lay a solid foundation for the polishing agent, enhances the adhesion
of polishing materials.
After
various grinding bridge saws
also needs to be polished, granite and again to restore its beautiful looks up.
No comments:
Post a Comment