The first use of manufactured stone house is Greek.
Since then, natural stone mining program has not changed much. Mined from the
mines is now under chunks of stone, and then press sheet or plate to buy, and
finally, of course polishing for processing purposes in accordance with stones.
Granite general is in accordance with this procedure.
Over the years most of these methods remain the
same, but the type of machine has undergone a dramatic change. With the
development of science, efficient and time-saving machines replaced the old
machine. Granite production process is important to use the three basic machine
that granite bridge saw, polishers and Router machine.
Saw
Previously saw the stone cut with a straight plate,
now using a diamond wire saw cutting. The machine has a wire, is fixed above
the diamond. Diamond is the hardest stone itself, so it can quickly be cut.
Then the granite bridge saw cut
the desired size.
Polishing
Machine
Polishing machine can make the granite surface
becomes smooth, like a mirror. The mouth is provided with a rotating abrasive
polishing machine, according to the different effects of the surface of the
material is different, excellent abrasive polishing material can be improved
smoothness.
Router Machine
Router machine is used to design the stone surface
pattern. Different designs to create a different edge. Router machine has a
rotating blade, fixed rotary diamond knife above, you can create the desired
design.
No comments:
Post a Comment